BCMGT - ENAMEL UNDERCOAT,245

  • MSDS: BCMGT
  • Manufacturer: COWMAN CAMPBELL PAINT CO
  • Product Name: ENAMEL UNDERCOAT,245
  • National Stock Number: 8010-00N006227
Product Identification

Product ID:ENAMEL UNDERCOAT,245
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006227
MSDS Number: BCMGT

Responsible Party
COWMAN-CAMPBELL PAINT CO

Emergency Phone: 206-783-8835

Cage: HO230

Contractor
COWMAN-CAMPBELL PAINT CO
SEATTLE, WA 98107 US

Cage: HO230

Ingredients

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 32%

OSHA PEL 100 PPM

Hazards

Effects of Overexposure:EYE:SEVERE IRRITATION. SKIN: DRYING/DEFAT.
VAPORS:HEADACHE,DIZZINESS,NAUSEA.

First Aid

First Aid:EYE:FLUSH WITH WATER 15 MINUTES,CONSULT PHYSICIAN. SKIN:WASH
WITH SOAP AND WATER,APPLY SKIN CREAM.INHALATION:REMOVE TO FRESH
AIR,GIVE ARTIFICIAL RESPIRATION,IF NEEDED,CALL A PHYSICIAN.

Fire Fighting

Flash Point:100F/37C
Lower Limits:1.0
Extinguishing Media:CO*2,DRY CHEMICAL,FOAM,WATER FOG
Fire Fighting Procedures:SELF-CONTAIN BREATH APP, WATER FOG TO COOL
EXPOSED CONTAINER
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE FROM
PRESSURE BUILD UP WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:SECURE ALL SOURCES OF IGNITION IN AREA OF
APILL OR RELEASED VAPORS. CLEAN UP SPILLS AS SOON AS POSSIBLE.
ABSORB LARGE SPILLS WITH ABSORBEDENT CLAY OR DIATOMACEOUS EARTH &
DISPOSE OF CONTAMINATED MATER IAL.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS & OPEN
FLAME. USE ONLY IN WELL-VENTILATED AREA.
Other Precautions:KEEP OUT OF REACH,DO NOT TAKE INTERNALLY.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE CONCERN.
Ventilation:LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:EYE BATH,SAFETY SHOWER.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:300F/148C
Vapor Density:>1
Evaporation Rate & Reference:<1(ETHER)
Percent Volatiles by Volume:53

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS
Hazardous Decomposition Products:CO,CO*2,WATER VAPOR.

Disposal

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.